| Misc. - Hold Back |
 |
No. 1-5600-ZU |
• Positive Door
• Holder
• For Holding Doos open against side of body. Hook manually engaged
and disengaged
 |
| Misc. - Hold
Back |
 |
No.
1-666-2 |
A simple positive door holder with good shock absorbing
qualities, giving near-silent operation. The rubber female portion
(acting as a door buffer) has a unique internal design, which
provides a positive grip on the male portion. The male portion
is molded from black polypropylene. The complete unit gives positive
corrosion-free performance. Furnished black.
  |
| Misc. - Folding
Step |
 |
No.
606009 |
Extra-large folding step is available in a polished
chrome, chrome flash, or cadmium finish. Step will sustain a
maximum static load of 1,000 lbs. and conforms to NFPA 1901 standard
for automotive fire apparatus 1999 edition sections 13-7.1, 13-7.2,
and 13-7.3. Also, features a slip-resistant surface and large
openings that can be used as a handhold.
|
| Misc. - 3-Point
Large Enclosure Roller End |
 |
No.
2500 |
• Lightweight 16-gauge steel channel is as
strong as rod, but offers significant cost savings.
• Riveted, long-wearing nylon rollers are extra-large diameter
(1 1/4") to provide firm, snug closure.
• Easily installed on any metal cabinet (including NEMA) 72"
or shorter
• Will accept any handle with 5/16" square shank, threaded or
not.
• Comes complete with two L-brackets for bolting or welding and
center cam latch.
• 36" rod is standard on No. 2500. When 48" rod is desired, specify
No. 1-2500-U.
Finish: Zinc -plated with yellow chromate |
| Misc. - Adjustable
Nylon Door Holder |
 |
Powerise™
Pneu-Spring® |
Now you can have a counterbalance device that
has so many features ... and thus such a wide range of applications
... that every day, someone comes up with a new place to use
it. Just consider these facts about Powerise™ Pneu-Spring®.
• It's a purely pneumatic device. The only moving part ... the
piston rod ... is totally self-lubricating.
• While acting like a compression-type spring, it delivers a
more consistent force through the entire stroke. This is because
of the inherent self-regulating nature of the design.
• It is self-dampening. The cushioned end motion reduces shock
to a minimum.
• Six standard off-the-shelf units are available to safisfy the
requirements of your applications.
 |
| Misc. - Over-Centre
Fasteners |
 |
No.
9/02094 - Locking Unit, w/ striker plate, bk
No. 9/02096 - Non-Locking Unit, w/ striker plate, bk |
A. Total Length .....................................................................
212 mm
B. Length to striker pin ..........................................................
120 mm
C. Max width (base) ...............................................................
96 mm
D. Length (base) ...................................................................
30 mm
E. Max width (strikers) ............................................................
93 mm
F. Hole centres (strikers) ........................................................
58 mm
G. Hole centres (base) ..........................................................
75 mm
H. Hole sizes (base) ..............................................................
8.5 dia
I. Hole sizes (striker) ..............................................................
8.5 x 20 mm
J. Length (striker) ..................................................................
72 mm
K. Max height (not shown) ....................................................
42 mm
 |
| Misc. - Panic Button
Emergency Stop Switch |
 |
No.
9/01433 - Emergency-stop pan & gasket
No. 9/01463 - Emergency-stop switch & contact block |
A. Pan total width .....................................................................
125 mm
B. Hole centres .........................................................................
90 mm
C. Projection, button .................................................................
13 mm
D. Total depth of pan ................................................................
43 mm
E. Projection, contractor ............................................................
16 mm
F. Diameter, "cup" .....................................................................
80 mm
G. Hole sizes (dia) ..................................................
4.75 mm, c/s 9 mm
Illustration shows switch and pan in assembled condition,
( w/o gasket for clarity). |
| Trim Seal |
 |
Many
Applications |
• Tonneau Covers
• Auto Trunks
• Car Hoods
• Utility Vehicles
• Doors
• Boat Hatches
• Tool Boxes
• Truck Cabs
Many other styles and sizes to choose from
Contact us to discuss your needs.
|
|
|
