Common latch applications - Doors for heavy Equipment, rescue/medical vehicles, or your own special application. These products have many different uses and come in many different styles. Below are a few examples of the latches we supply. Many other latches are available with additional features and mounting options. For more specific information on these or other models, Contact Industrial Hardware.
Some different types of Latches that we carry are:
1,2 & 3 POINT, QUARTER TURN, TOOL & KEY OPERATED, OVER-CENTER, DRAW, ROTARY, SLAM, DEAD BOLT, ROLLER, LIFT, MULTI-POINT FOR RFI & EMI CABINETRY, LOW PROFILE, PUSH BUTTON LOCKING COMPARTMENT, SPRING PULL, SLIDING DOOR RECESSED TRIGGER NEMA ENCLOSURE CLAMPS AND MUCH MUCH MORE ...
| Latches - Compression Latches | |
 |
No.
18400 No. 18500 |
| The 18400 series T-Handle is designed to fit most
existing T-Handle cutouts due to the innovative blind mount bracket
designed for panel ranges of .03" to .125". Product features include
an Ergonomic Handle design for a large grip, water-resistant construction,
built in cylinder cover hidden below the handle grip, blind mount with
no visible fasteners, Double-Bitted key cylinder with over-molded key,
padlocking feature for _"loop, compression roller cam for ease of
operation and tight sealing. Gasket is pre-installed to the receptacle
for ease of assembly and water resistance. Cylinder Plug ordered
separately with removable plug design for ease of assembly – key series
J201-J210. |
|
| Latches - Recessed T-Handle | |
 |
No.
2-8400 |
| -Recessed T Handle and many other styles available
.... |
|
| Latches - Recessed T-Handle | |
 |
No.
18400-54 PR 31 |
| -Brand new item!! |
|
| Latches - Passenger Restraint Latch | |
  |
No.
1-400 R&L No. 400 R&L Rotary Latch No. 2T-400-52 |
| 1-400 R&L Right-Hand shown. Left-Hand opposite. Has two holes in actuator arm for attaching remote latching points. NOTE: Rotary Latch is available with 1/4"x20 UNC threaded inserts. Specify when ordering (i.e. IT-400 R) 400 R&L Rotary Latch These are two-stage latches, with both primary and secondary latching capabilities with one remote attaching point. Meets FMVSS 206 Standards for personnel restraint applications. To comply with the FMVSS 206 Standards, the appropriate latch must be used in conjuction with striker assembly No. 2T-400-52 and a certified FMVSS door system. 2T-400-52 Six Lobe Drive, Striker/Washer, Sub-Assembly |
|
| Latches - Slam Latches/Single Point | |
 |
No. 1031-A |
| Part No. 1030-A (non-locking) and 1031A (locking) available in Matte Black (MB) or Matte White (MW). Made out of UV resistant thermoplastic. Ideal for small compartments or doors. To open, pull ring, to close, push door closed. Supplied with mounting bracket and stainless steel striker plate and mounting screws. Locking version shipped with one key. Key Nos. available are 100-109.  |
|
| Latches - Slam Latches/Single Point | |
 |
No.
ECL-740-P8 No. ECL-740-KP8 |
| No. ECL-740 paddle handle is a slam latch incorporating
a hook bolt. This variation is ideal for top opening lids such as
tool boxes and storage boxes. Key-locking version supplied with 2 keys. Materials: Paddle handle and housing are manufactured from high strength, UV stabilized thermoplastic. Metal stampings are 300 Series stainless. Key cylinder is zinc die cast. Installation is fast with the use of the blind mount bracket and (2) screws, which are provided. Torque mounting bracket screws to 14+/- 3in./lbs. |
|
| Latches - Slam Latches/Rotaries | |
 |
No. 8-240 R/L |
| A Mini Rotary is ideal for small applications. Available
in a standard finish of zinc plated or stainless steel (Part No.
8-240-SS R/L) both with Everlube latch pawls. Available in single stage (Part No. 8-241) can be used with .38" dia. striker (Part No. 240-52U)  |
|
Latches - Compression Latches |
|
  |
No.
634/634-K No. 534 |
| No 634/634-K Trigger Latches are ideal for cabinets, or compartment doors on trucks, buses, or boats. Available in a black powder coat or chrome finish, locking (Part No. 634) or non-locking (Part No. 634-K). Standard features include one key with locking version, dust shutter on key cylinder to help reduce dirt from entering cylinder, mounting bracket, mounting screw, and adjustment bolt with hex heads for faster installation. Other part numbers are available for different grip ranges that are needed. No. 534 Trigger Latch with Raised Button No. 534 is an adjustable compression latch which is activated by a push button. This durable latch finds wide use for installation on cabinetry panels where a low profile is desirable. • Blind mounting • All components are die-cast • Adjustment screw to achieve desired compression • Key-locking cylinder package available |
|
Latches - Heavy Duty Spring Latch |
|
 |
No.
719 No. 720 |
  |
|
Latches - Large Enclosure Latches |
|
 |
No.
5658/82X* No. 5646-2XX* |
| No. 5658-82X Two-point latch with flat rod connected to tapered take-up slide bolts. Has malleable iron tumbler. Finish: Zinc-plated No. 5646-2XX Two-point latch with round rod plus rubber anti-rattle grommets in the rod guides. Note that rod guides may be inverted for use as strikes. Has malleable iron tumber. Finish: Zinc-plated Also, available with zinc-aluminum alloy tumber in center case where cost and weight are a consideration. To order, add suffix "X" to base number. Example: No. 5646-X-2XX *82X and 2XX indicates packed four sets to a box. |
|
| Latches - 'Oval' Paddles Hook-Latch Models | |
  |
No.
9/03440 - Oval paddle, hook-latch, locking No. 9/03440/01 - As above, standard keys FT111 No. 9/00406 - Loop striker (stainless steel) |
**BRAND NEW ITEM** A. Case Length ..................................................................... 150 mm B. Case Width ........................................................................ 120 mm C. Fixing Centres .................................................................... 56 mm D. Fixing Centres .................................................................... 70 mm E. Hook Width......................................................................... 22 mm F. Hook Penetration................................................................ 30 mm G. Hook Engagement ............................................................ 12 mm H. Hole Sizes .................................................................. M6 x 10mm I. Maximum Depth .................................................................. 53 mm J. Recess Length .................................................................. 120 mm K. Recess Width .................................................................... 100 mm   |
|
| Latches - 'Oval' Paddles Slam-Bolt Models | |
   |
No.
9/03419 - Oval paddle with slam bolt No. 9/03419/01 - As above, standard keys FT111 |
| **BRAND NEW ITEM** A. Case Length ..................................................................... 150 mm B. Case Width ........................................................................ 120 mm C. Fixing Centres .................................................................... 56 mm D. Fixing Centres .................................................................... 70 mm E. Hook Width......................................................................... 19 mm F. Hook Penetration................................................................ 21 mm G. Hook Engagement ............................................................ 26 mm H. Hole Sizes .................................................................. M6 x 10mm I. Maximum Depth .................................................................. 40 mm J. Recess Length .................................................................. 120 mm K. Recess Width .................................................................... 100 mm  |
|
| Latches - 'Claw' Latches Side-Mount | |
  |
No.
9/01283 - Claw Latch RH, side-mount No. 9/01583 - Claw Latch LH, side-mount No. 9/00095 - Loop-type striker No. 9/00724 - Pin-striker, 52 mm No. 9/01246 - Pin-striker, 23 mm |
A. Length ............................................................................... 100 mm B. Height ................................................................................. 50 mm C. Width .................................................................................. 19 mm D. Location ............................................................................. 21 mm E. Hole Centres ...................................................................... 76 mm F. Location ............................................................................. 30 mm G. Hole Sizes (dia.) ................................................................. 03 mm H. Hole Sizes.................................................................. 6.5 x 12 mm I. Width ................................................................................... 51 mm J. Height ................................................................................. 35 mm K. Length ............................................................................... 51 mm L. Location ............................................................................. 32 mm M. Hole Centres ...................................................................... 32 mm N. Hole Sizes ....................................................................5.5 x 9 mm O. Pin Diameter ................................................................... 12.5 mm P. Thickness ............................................................................. 3 mm  |
|
| Latches - 'Claw' Latches Top-Mount | |
  |
No.
9/00724 - Striker, Pin-type No. 9/00263 - RH latch, w/ fitted moulded cover No. 9/01183 - Latch w/ engaged position No. 9/00283 - Latch w/ engaged position No. 3/21787 - Moulded 'buffer' only |
A. Length ............................................................................... 100 mm B. Height ................................................................................. 50 mm C. Width .................................................................................. 19 mm D. Location ............................................................................. 21 mm E. Hole Centres ...................................................................... 82 mm F. Location ............................................................................. 30 mm G. Hole Sizes (dia.) ................................................................. 03 mm H. Hole Sizes....................................................................... 7 x 9 mm I. Width ................................................................................... 51 mm J. Height ................................................................................. 35 mm K. Length ............................................................................... 51 mm L. Location ............................................................................. 32 mm M. Hole Centres ...................................................................... 32 mm N. Hole Sizes ....................................................................5.5 x 9 mm O. Pin Diameter ................................................................... 12.5 mm P. Thickness ............................................................................. 3 mm  |
|
